-
Phone
86-18561609810
-
Address
4#Building, No. 178 Yuanjiang Road, Huangdao District, Qingdao, Shandong, China
-
E-mail
LatestProducts
High/Low Temperature Resistant Tile Adhesive/Glue with 3.3MPa Adhesion
China High/Low Temperature Resistant Tile Adhesive/Glue with 3.3MPa Adhesion, Find details about China Ceramic Adhesive, Ceramic Tile Interface Agent from High/Low Temperature Resistant Tile Adhesive/Glue with 3.3MPa Adhesion - Qingdao Shindah Machinery Co., Ltd.
Description
Basic Info
- Model NO.: WL-168
- Morphology: Water Emulsion
- Material: Polyester
- Main Agent Composition: Natural Polymer
- Promoter Composition: Emulsifier
- Color: White
- Transport Package: Pallet
- Origin: China
- Bonding Function: Instant Adhesive
- Application: Construction, Fiber & Garment
- Classification: Room Curing
- Characteristic: Waterproof
- Composition: Inorganic Material
- Trademark: wall lover
- Specification: 25kg
- HS Code: 3506919090
Product Description
Product Description:
Patent new type Tile Adhesive with super strong adhesion, good permeability, pave after brush, no need waiting for dry, save labor and working time. Refuse hollow, falling-off. 25% cost of the traditional tile adhesive.
It is single component, water-based, non-toxic, environmental friendly adhesive, with super strong adhesion, water resistant and high & low temperature resistant. Most important, it can follow the stress when there is thermal expansion and contraction and impact force. Therefore, using this type ceramic tile can effectively solve the hollow, falling-off problems.
Specially used in backside of hard brick stone, such as Vitrified tiles, ceramic tile, archaize brick, Mosaic, marble, man-made stone, natural stone etc. which are with high density, low water absorption hard brick stone tile.
Wall Lover Has good permeability and waterproof performance, can fully vitrified brick surface, and blend suspected soil infiltration, significantly improve the bonding strength on the surface (5-8 times). Effectively prevent the brick falling off. It is the best choice to decorate the wall, brick, floor tile and the back of marble.
| Implementation standard | jc/t 907-2002 |
| Environmental standard | gb 18583-2008 |
| Bonding strength/MPa | 3.3 |
| Temperature/ºC | >5 |
Usage:
Apply to the surface treatment of concrete, wall tile, floor tile, marble, glass, etc.
Basic processing:
The surface should be firm, no deformable agent, floating ash and oil stained, and the wall besmear is brushed evenly, one time is ok.
Consumption:
1 kg WL - 168 can be coated in 8 to 12 square meters.
Storage and transport:
dry, ventilated, avoid light, environmental temperature is higher than 5 ºC.
Note:
1. This product shall not be used in combination with other solvents and esters.
2. If touched, Wash your eyes, mouth and skin with water.
3. The product can permeate the substrate rapidly, and the coating one time.
4. Winter transport and storage, keep warm, avoid the product freeze and spoil.
welcome to inquire.
mobile:
